Why the font doesn't change in the Word. Change default font in Word Fonts don't change in word

Sometimes corporate permission settings or some add-ons change the default font to the original font. In this case, you can try several options.

Checking permissions

Click the button Start.

In field Search enter Normal. dotm and press the button Search.

Right click Normal. dotm and select the item properties.

In the tab General make sure the checkbox only reading not installed. If installed, remove it.

Open the tab Security... In chapter group or user names select your name and make sure you have write permission for the field permissions .

Click the button OK.

If you are unable to clear the Read Only check box or do not have write permission, contact the person in charge of computer systems at your company.

Disable add-ins

If you have write permissions but your default font selection is not fixed, you may need to disable Word add-ins and change the default font after that. Here's how it's done:

Please select file > Options > superstructures.

In the list Add-ons find one of the settings you want to disable and remember the add-in type indicated in the column Type of.

Select this add-in type from the list Control and press the button Go to.

Uncheck the boxes for the add-ons you want to disable and click OK.

Repeat steps 1-4 for other types of add-ons.

After you change the default font, enable the add-ons.

Please select file > Options > superstructures.

Select the add-in type from the list Control and press the button Go to.

Check the boxes for the add-ons you want to enable and click OK.

Repeat steps 1-3 for other types of add-ons that you want to enable.

Note: It is not necessary to disable the Document Inspector add-ins.

To always use your favorite font in Word, select it as the default font.

The default font is not saved

Sometimes, organizational permissions are configured so that instead of a new default font, it is constantly restored to its original version. In this case, try the following:

Why doesn't the font change in Microsoft Word? This question is relevant for many users who have encountered such a problem at least once in this program. Select the text, choose the appropriate font from the list, but no changes are made. If this situation is familiar to you, you have come to the right place. Below we will figure out why the font in the Word does not change and answer the question whether this problem can be fixed.

No matter how trite and sad it may sound, there is only one reason that the font does not change in the Word - the font you have chosen does not support the language in which the text is written. That's all, and it is impossible to fix this problem on your own. It's just a fact to be accepted. The font may have been originally created for one or several languages, just the one in which you typed the text may not appear in this list, and you should be ready for this.

This problem is especially typical for text printed in Russian, especially if a third-party font is selected. If you have a licensed version of Microsoft Office installed on your computer that officially supports the Russian language, then when using the classic fonts presented in the program initially, you will not encounter the problem we are considering.

Note: Unfortunately, more or less original (in terms of appearance) fonts are often completely or partially inapplicable to the Russian language. A simple example of this is one of the four available Arial font types (shown in the screenshot).

Solution

If you can create a font yourself and adapt it for the Russian language - great, then the problem raised in this article will certainly not affect you. All other users who are faced with the impossibility of changing the font for the text can only recommend one thing - to find in the large list of Word fonts as close as possible to the one you need. This is the only measure that will help to find at least some way out of the situation.

You can also search for a suitable font on the vast expanses of the Internet. In our article, presented at the link below, you will find links to proven resources where a huge number of fonts for this program are available for download. There we also talk about how to install a font in the system, how then to activate it in a text editor.

Lesson:

Conclusion

We sincerely hope that we have answered the question why the font does not change in Word. This is indeed an urgent problem, but, to our great regret, for the most part, there is no solution to it. It so happened that the font that is not always attracted to the eye can be applied to the Russian language. But, with a little effort and effort, you can find a font that is as close to it as possible.

Question: Word doesn't change the font

There is a file. The font "gost type B".
I want to change to Times or Arial. Doesn't change. The format does not clear, etc. I don’t know how and what to do.
File fragment in attachment.

Answer: vmaxime, tried the VBA code taken. It helped with the attached piece, try it on a copy of the document.

Sub changeToRusGOSTB () Selection.WholeStory Selection.Font.Name = "GOST type B" For i = 61632 To 61695 a1 = ia = Trim ("^ u") & Trim (Str (a1)) b1 = i - 60592 Selection. Find.ClearFormatting Selection.Find.Replacement.ClearFormatting With Selection.Find .Text = a .Replacement.Text = ChrW (b1) .Forward = True .Wrap = wdFindContinue .MatchCase = True End With Selection.Find.Execute Replace: = wdReplaceAll Next i For i = 61472 To 61533 a1 = ia = Trim ("^ u") & Trim (Str (a1)) b1 = i - 61440 Selection.Find.ClearFormatting Selection.Find.Replacement.ClearFormatting With Selection.Find .Text = a .Replacement.Text = ChrW (b1) .Forward = True .Wrap = wdFindContinue .MatchCase = True End With Selection.Find.Execute Replace: = wdReplaceAll Next i For i = 61535 To 61627 a1 = ia = Trim ("^ u ") & Trim (Str (a1)) b1 = i - 61440 Selection.Find.ClearFormatting Selection.Find.Replacement.ClearFormatting With Selection.Find .Text = a .Replacement.Text = ChrW (b1) .Forward = True .Wrap = wdFindContinue .MatchCase = True End With Selection.Find.Execute Replace: = wdReplaceAll Next i Selection.WholeStory Selection.LanguageID = wdRussian Application.CheckLanguage = True End Sub

Question: Style in Word 2003

Good afternoon.
Maybe someone came across a similar one.
In a Word 2003 document, Font - Times New Roman, for some reason gives only bold and bold italic - style, even if you look in the Font menu in the Style section there are only two items, although in other fonts everything is fine, the style is normal. Accordingly, the entire document turns out to be written in bold, which is not good.
Tried reinstalling all of Office but didn't help. Unfortunately, I cannot attach a screen. it's on another computer.
I ask for advice)

Answer: Each font style is a separate file. Perhaps you do not have files of the corresponding faces, look in the fonts folder there should be four files. Download Times New Roman font, all styles.

Q: Change language-specific font settings in Word

Good afternoon.

I constantly face a problem - when choosing a language (in my case, Sanskrit) Word changes the font from the previous installation (Times New Roman) to Mangal every time. It has not yet been possible to disable this feature.

Added after 9 minutes
Also changes to Colibri, in the same word. Another point is that the layout is not included with Windows.

Answer: Further more interesting - Mangala is not in the list of fonts, but it reappeared in the Word, and when typing with this layout, only it is turned on and does not jump. Previously, I necessarily jumped within one word.

Question: Word fonts

How do you add letters of the alphabet of another language to the ready-made Word fonts?

Answer: In particular. program Font Creator 5.0 allows you to edit existing TrueType and OpenType fonts (see) and create new fonts based on existing ones.

Added after 3 minutes

Just be careful with changes - not only Word uses fonts.

Also note that some non-standard fonts may affect other fonts (in particular when displayed in a browser). We recently encountered such a problem, and in order to restore the browser to normal, the non-standard font had to be removed.

Question: Hieroglyphs in Word

Good day! I have such a problem, there is a document in which there are formulas, but they are displayed in hieroglyphs. And when you click on it, MathType shows a completely different formula. Tried different versions of Word2007,2010 also MathType 4.0; 6.0; 6.9 and MathCAD 2000.14. I also tried to change different fonts. The attachment contains a part of the file (I can send it completely to the mail) and images with the problem. Please help fix this if possible.

Answer: Maybe it's all about fonts or versions. I just don't know how to fix it anymore.

Question: Grouping fonts in Word

Hello!
Is it possible to somehow combine certain (selected by me) fonts into a separate folder / section? Maybe what add-on / add-on needs to be installed or something?

The problem is that there is a certain set of fonts (specific, so to speak), the name of which does not correctly display the word, and between them you need to enter a system like sections (with the names of the sections / folders themselves) for the convenience of finding the desired font (so that each since you do not poke at random looking for the right one, and since they are not all very different from each other, this further complicates the search)

Answer: Dokim0s, can the styles do with the fonts you want?

Question: "Sticking" letters in MS Word 2003

"Sticking" letters in MS Word 2003 (in 2007 and 2010 - the same!). View - "Normal" or "Page Layout", with "Web Document" - normal. It appears only when displayed on the monitor screen (both CRT and LCD!), On the print it is normal. Visible in the smallest print (e.g. Tahoma 8). Adjusting kerning and spacing does not help: when you increase the spacing, "stuck together" letters "break apart", but the intervals that were normal before become unacceptably large, i.e. there is a noticeable unevenness in the value of intersymbol intervals. The screen resolution does not matter (it appears up to the native 1920 * 1200 on a 17 '' laptop!). Is this problem solvable?

Answer: viwaldy,
For all our documents, the Times new Roman font is regulated, perhaps the problem is in it. If you change the font to any of the problem documents and vice versa, then in half the cases it helps.

Question: Is the presence of the Tahoma font guaranteed in the OS?

Good evening.
I am writing a program that should work on Windows XP as well. It checks if the Segoe UI font is installed and changes the font in all signatures in the program window to this one. If there is no font, Tahoma is used.

I was interested in the question: Is it possible to be sure that Tahoma will be present on Windows XP? I saw it in a clean install but didn't try to uninstall it. Is there a font you can be sure of in Windows XP?

Answer:

The default shell user interface font differs from one set of languages ​​to another. For all Latin and European languages, it remains the same as English (Tahoma).
The Arabic Widows edition of the default desktop theme is equal to the classic, classic desktop font used by Microsoft Sans Serif during the Tahoma standard desktop font.

Are you annoyed with having to change the font size every time you create a document in Word? Want to know a way to end this once and for all and set your favorite font size as the default for all documents ?!

Microsoft has installed a font in Word 2007 Calibri size 11 after being in this role for many years Times New Roman size 12. While easy to get used to, you can change almost all of the default settings in Microsoft Word. For example, you can use the font Calibri size 12 or Comic sans size 48 - whatever you want! Next, you will learn how to change the default font settings in Microsoft Word 2007 and 2010.

How to change font settings in Microsoft Word

To change the default font settings, click on the small arrow icon in the lower right corner of the section Font(Font) tab Home(Home).

In the dialog box Font(Font) set the desired parameters for the font. Pay attention to the line + Body(+ Body text) in the field Font(Font), it says that the font itself will be determined by the style of the document you choose, and only the style and size of the font are adjusted. That is, if the font is used in the document style settings Calibri, then the default font will be used Calibri, and the size and style of the font will be whatever you choose. If you want to set a certain font by default, just select it in the drop-down list, and this choice will take precedence over the font that is selected in the document style settings.

Here we will leave all the settings unchanged, just set the font size to 12 (this is the size of the text for the body of the document). Those using Asian languages ​​such as Chinese may see the Asian settings box. When the options are selected, press the button Set as Default(Default) in the lower left corner of the dialog box.

You will be asked to confirm if you really want to set these default settings. In Word 2010 you will be offered a choice of two options - change the default settings only for this document or for all documents. Check option All documents based on the Normal.dotm template(all documents based on the Normal.dotm template) and click OK.

In Word 2007, just click OK to save changes to the default settings.

From now on, every time you start Word or create a new document, your default font will be exactly as you specified. If you decide to change the settings again, just repeat all the steps again.

Editing a template file

Another way to change the default font settings is to change the file Normal.dotm... Word creates new documents from this file. It usually just copies the formatting from that file into the newly created document.

To change the file Normal.dotm, enter the following expression in the address bar of Explorer or on the command line:

% appdata% \ Microsoft \ Templates
% appdata% \ Microsoft \ Templates

This command will open the Microsoft Office Templates folder. Right click on the file Normal.dotm and from the context menu select Open(Open) to open the file for editing.

Do not try to open the file by double-clicking the left mouse button - this will only lead to the creation of a new document from the template Normal.dotm, and any changes you make will not be saved in the template file.

Now change any font settings as you normally would.

Remember: Anything you change or enter in this document will appear in every new Word document you create.

If you suddenly want to reset all settings to the initial ones, just delete the file Normal.dotm... Word will recreate it with standard settings as soon as the program is started again.

Please remember: Changing the default font size will not affect the font size in pre-existing documents. They will continue to use the settings specified when these documents were created. Also, per template Normal.dotm some add-ons may be affected. If it seems to you that Word does not remember the font settings, try disabling add-ins and see the result.

Conclusion

Sometimes little things can be very annoying. The ability to customize the default font just the way you want it is great for reducing annoyance and making your work more productive.

Now answer the question: Which default font do you prefer - Calibri size 11, Times New Roman size 12 or some other combination? Write the answers in the comments, let the world know what you like!

If you at least sometimes inserted text into Microsoft Word from some other file, for example, with the * .pdf extension, then you probably came across a situation when it was impossible to change the writing style of letters. Let's now figure out what the problem might be, and what to do to still change the font for the text.

The first reason may be rather banal - you have not selected the desired fragment due to inattention. Therefore, select either everything printed or a small piece and select one of the available font options from the drop-down list.

Some people are faced with the following situation - they inserted information into a document from the Internet and cannot change the words so that they become the familiar Times New Roman or Arial.

In this case, you can proceed as follows. Go to Start and find in the list or through the search bar.

Return to the main document and copy the piece you are working with from it - select it and select the appropriate item in the context menu, or after selection press "Ctrl + C".

After that, do the opposite - copy the text from Notepad and paste it into Word. This can help.

There is another option. To do this, select the desired fragment and on the "Home" tab click on the button "Clear format", or, in newer versions of the editor, "Clear all formatting".

If none of the above has helped, and at the same time you are trying to apply some beautiful font from the list to the text, then it simply cannot be selected for Russian-language words.

The fact is that some fonts are not created for all languages, and when you use one of these, the printed may simply not change.

Therefore, it is worth choosing from the list something else that is applicable to your text.

If you haven't picked up anything, then you can install additional fonts in the Word. Click on the link to download a set of 179 pieces, and there you will learn how to install them.

Everything from the drop-down list can definitely be applied to the English-language text. Highlight words, choose a font, and the typed will change appropriately.

These are all the methods I know that you should use to solve the problem with the font that cannot be changed in Word.

Rate article: