A laptop is a portable computer that has all the necessary input devices - a keyboard and a mouse, the role of which is played by a touchpad. But if you do not use a laptop in "field" conditions and work with it at a desk, then sometimes it is more convenient to connect a regular computer mouse; in this case, the question arises - how to disable the touchpad on a laptop?
Special buttons
Take a close look at the touchpad and the area around it - on some laptop models there is a special button to disable the touch input device. For example, some HP notebook models have this switch: 
The off area can be located on the touchpad itself and look like a small depression or dot. 
Double-clicking on such a selection will turn the input device on / off.
On the keyboard of any laptop there is an Fn key, which is responsible for turning on / off certain functions of the computer. This key is used in combination with keys from the F1-F12 row.
If your laptop does not have a dedicated hardware button to disable the input device, try using the Fn + F1… F12 function key combination.
Look at the row of keys F1-F12 - one of the buttons should have a graphic image of the touchpad. For convenience, here is a small list of laptop manufacturers and possible keyboard shortcuts:
Look at the name of your manufacturer and try one of the above. Turning on the touchpad is done by pressing the same combination, so that if necessary, you can quickly change the mode of operation of the touch input device.
Mouse Properties
In Windows 7 and later versions of operating systems from Microsoft, it is possible to automatically disable the touchpad when a regular computer mouse is connected via USB.
As soon as you connect an external input device via the USB interface, the built-in hardware stops working. Disconnect the mouse - the touchpad will work again.
To set up such a configuration, follow these steps:
On the same tab, you can simply disable the touchpad by clicking on the button of the same name.
Another way is to disable the hardware itself through the "Device Manager":
After completing this procedure, the touchpad will not work.
Disable via BIOS
If you decide to use the mouse on an ongoing basis and disable the touchpad, then it is better to do this right away in the basic I / O system; for this you need to know how to properly configure the BIOS:
You have disabled hardware support for the touchpad; you can enable it, if necessary, in the same way, by changing the value back from "Disabled" to "Enabled".
The touchpad is a touch-sensitive mouse that comes with any laptop. In some cases, for example, when using an additional external mouse, it is more convenient to disable the touchpad so that it does not react to accidental touches.
In this article, you will learn how to turn off the touchpad on a laptop. We will tell you about several methods at once, choose the one that is convenient for you.
The touchpads manufactured by Synaptics, which are equipped with most laptops, can be disabled through the properties of the mouse. To get into the properties of the mouse, go to the "Control Panel", then open the section "" and there open the "Mouse" (in different versions of Windows, access to the properties of the mouse may differ slightly).
A window with settings will open in front of you. Go to the “Synaptics” parameters tab (it may have a different name, it can be recognized by the red icon). Here you will see an option "Disconnect when connecting an external USB mouse". Toggle it on and the touchpad will turn off automatically if you are using an optional mouse.
If your mouse is not Synaptics, and the official driver is installed on it, then you can turn off the touchpad through the manufacturer's software, if provided.
Shutdown via device manager
If the method described above does not work, then use the universal method. It will fit on any laptop.
- open the "Device Manager" through the "Properties" item of the "Computer" shortcut;
- find "Mice and other pointing devices" in the list of devices. There you will see your touchpad, which everyone has different names;
- click on it with the right mouse button and then click "Disconnect device".
Everything. The touchpad is off.
Switching off with keys
This is also a universal method that will suit everyone, however, its implementation will differ on different laptops. The essence of the method is to use the Fn key, which is on the keyboard of each laptop. By pressing it and another additional key, the user can turn on and off various devices, control the computer's volume, and do other operations.
To turn off the touchpad on a laptop, you must press the Fn button and, while holding it, press another key. You can recognize the second key by the image of the touchpad on it (or similar)
Here is a list of combinations for popular laptop brands:
These combinations will only work if the laptop has official drivers installed.
On most HP models, you cannot turn off the touchpad with key combinations. To disable here, you can use two short touches to the upper left corner of the working area of the touchpad. On some models, instead of double-tapping, you need to apply a five-second one-tap.
BIOS shutdown
The method is suitable for advanced users who understand what to do, since incorrect BIOS settings can disrupt the operation of the computer.
When the computer boots, enter the BIOS controls (they differ from manufacturer to manufacturer, usually by pressing the Del or F2 keys). Disabling the touchpad can be done in the "Configuration" or "Integrated Peripherals". Find "Pointing Device" in this section and change its value to "Disable". After that, you can exit the BIOS, save the changes, and boot the computer. The touchpad will not work.
Video - how to turn off the touchpad on a laptop
Most laptop owners and those who occasionally have to deal with laptop computers have come across a control device such as touchpad... Someone, for the sake of mobility, completely abandons the classic mouse, who uses the touchpad only in extreme cases, and someone does not recognize this equipment at all and considers it to be absolutely inconvenient.
Be that as it may, many laptop and netbook users sometimes need disable the touchpad completely... In this article, we will consider several options, how to turn off the touchpad on a laptop .
Disabling the touchpad with the Fn key
The standard way to disable the touchpad is to use hotkeys laptop.
Hotkeys- a combination of two or more keys, when pressed simultaneously, performs an action or function that is not assigned by default to any of the original keys
In order to disable the touchpad using hotkeys, you first need to find the function key on the keyboard, labeled Fn.
Fn key(from english " function") is a function key that, when pressed, affects the functions of some other keys, on which, most often, there is an additional designation. Used for the operation of combinations of various hot keys
Fn key location may differ slightly depending on the manufacturer of the device and its model, but, most often, the Fn key is located in the lower left corner of the keyboard to the right or to the left of the Ctrl key. Below are some examples in the photos:
Next, you need to find the key that is responsible for activating and, accordingly, deactivating, the operation of the touch panel. There may also be options, but, in the overwhelming majority of cases, this function is assigned to one of the top row keys F1-F12. On the key we need, the manufacturer must have an image of the touchpad (or a crossed out touchpad) applied. The image can be both on the upper surface of the button and on its lower side edge.
Now all that remains is to hold down the Fn key and, without releasing it, press the key that is responsible for activating / deactivating the touchpad. The touchpad should stop responding to touches and presses. If it doesn't, the computer probably does not have the software required for the function keys to work. More on this below.
Fn key program
If you have on your laptop Fn and F1-F12 function key combinations do not work(and others), the most likely reason is the lack of proprietary software for the function keys.
Of course, the reason for the inoperability of the Fn button can be caused by the lack of drivers for the chipset or video card, and mechanical damage to the keyboard, and even virus infection of the system, but, nevertheless, the main reason lies precisely in the software component of the function key.
So, for the operation of the keys for disabling the touchpad, adjusting the brightness of the screen, activating Wi-Fi, switching to sleep mode and some others, different utilities are responsible for different laptop manufacturers. Today, even devices of different models from the same company may require different programs.
Let's consider an approximate list of software required for the Fn key to work, depending on the manufacturer of the laptop.
| Manufacturer laptop |
Required program |
|---|---|
| ASUS | ATKACPI |
| ATK hotkey tool | |
| Acer | Acer LaunchManager Application |
| Acer ePower Management Application | |
| Dell | Dell Quickset Application |
| HP | HP Quick Launch buttons |
| HP HotkeyMonitor | |
| Lenovo | Energy Menegement |
| ATK Hotkey Driver | |
| MSI | System Control Manager (SCM) |
| Samsung | Samsung Easy Display Manager |
| Sony | Sony HotKey Utility |
| TOSHIBA | TOSHIBA Value Added Package |
Any of these programs, if necessary, can be downloaded from the official website of the company, or, in the absence of full access to the Internet, from the disk supplied with the computer. In the second case, it is necessary to understand that the version of the program may already be outdated.
Disabling the touchpad when connecting a USB mouse
This method will be convenient for those who use a laptop using both a familiar USB mouse and a standard touch panel of the machine.
The essence of the method is that until an alternative pointing device, that is, a mouse, is connected to the computer, the touchpad will be in an active state. As soon as we insert the USB connector of the mouse into the socket on the laptop case, all control goes to it, and the touchpad stops responding to any actions.
To achieve this, you first need to open the proprietary touchpad driver utility. Most often, you can do this by going to Control panels to section Hardware and Sound and choosing there in the section Devices and Printers item Mouse.
Go to the tab in the window that opens ELAN(or an alternative name for the control utility) and look for the item " Disconnect when an external USB mouse is connected". If there is such an item, then put a checkbox in front of it and apply the changes made.
Now when a mouse is connected to a laptop, the touchpad will stop working.
If your laptop is enough " old", then when working on a new version of the operating system, that is, on Windows 10, the standard software may not work correctly. Even with the checkbox to disable the touchpad when the mouse is connected, the touchpad may continue to work.
In this case, you can click on the button in the same window Stop device... Don't be intimidated by the displayed device PS / 2, it is likely that the system, due to compatibility issues, perceives the touchpad this way. The touchpad will be completely disabled.
Disable touchpad in Device Manager
Raising the degree of intrusion into the system and now consider, how to disable the Touchpad via Device Manager.
In fact, it is not as scary as it might seem at first glance. Even if we unintentionally remove one of the standard devices, be it a touchpad or a mouse, after restarting the computer, with a high degree of probability, the drivers will be restored automatically. If we turn off both the touchpad and the mouse, then you can easily reactivate them using only one keyboard.
First, open Device Manager by following the path:
Control Panel \ System and Security \ System
We find there a section Mice and other pointing devices(the name of the section may differ slightly). There will be 2-3 devices under this section, among which there should be our touchpad. Click on the desired entry with the right mouse button and, if provided by the hardware configuration, click on the item Disable device... After that, the touch panel should be completely turned off.
Disable touchpad in BIOS
A more radical option for deactivating the Touchpad in a laptop is turn off the touchpad in BIOS.
This method can be conventionally called low-level.
If we disable the touchpad in the BIOS, then it will no longer be possible to activate it through the system, this should be borne in mind when setting up the computer
To start enter the laptop BIOS... To do this, when switching on, press the key programmed for a specific model of the device. There can be many options: Del, F2, Esc, F6, and so on. You can just guess the desired key by selection, or you can find the desired option by the laptop model on the network.
In BIOS, we need to find the hardware settings, they can be located, for example, on a tab that has the word in its name Advanced, this is the most common option.
We are interested in the item that will be called Internal Pointing Device(from English " Internal pointing device"), Touch pad mouse or similar.
All we need to do is transfer the parameter state from Enabled(Included) in Disabled(Disabled) and save the changes made when exiting the BIOS (with the F10 key or other programmed in a specific motherboard).
After the system starts up, the touch panel will be inactive.
Disabling the touchpad loop
And the last way to disable the touchpad, which is worth mentioning within the framework of this publication, is disconnecting the Touch Panel contacts from the connector on the motherboard.
Most often, there is no need to resort to this option, but if nothing else remains, then it is quite possible to use it.
Pros of disabling the touchpad physically:
- the way is 100%. The touchpad will not work in normal mode or safe mode. Naturally, the disconnection will affect all users / accounts;
- can be used with limited user rights;
- you can disable the touchpad in this way, regardless of the installed OS.
Of course, the method is not without its drawbacks.
Cons of disabling the touchpad physically:
- sufficient labor intensity of the method. It is required to either remove the laptop keyboard, or even disassemble it;
- if you need to re-enable the touchpad, you will have to re-remove the keyboard or disassemble the laptop.
To disconnect the laptop touchpad loop, you need to determine its location. It is better to do this in advance, so as not to make unnecessary manipulations. You can consider the device of a laptop on the network among many manuals.
On many models, the laptop ribbon cable connector can be accessed by removing the keyboard. To do this, you need to along the upper perimeter of the keyboard move the retaining clips to the side of the screen and neat hook the keyboard itself... First you need to turn off the computer and disconnect the charger.
If you have problems with removal, then it is also worth referring to the instructions for disassembling the device of your model.
Now let's go directly to disconnecting the touchpad cable. There are two main types of ribbon connectors:
- Flip-up latch connector.
- Retractable latch connector.
Open the connector lock and remove the ribbon cable from it.
We recommend insulating the loose cable connector. In order not to stain the connector with glue from electrical tape, for these purposes it is advisable to use, for example, a small piece of a heat-shrinkable tube, just do not overdo it with heating it.
We put the cable in its previous state, without inserting the connector into the socket, and put the keyboard in place.
We have reviewed the main ways to disable touchpad on laptop... Now we will not be bothered by accidental touches of the touchpad while working with the laptop keyboard.
Built-in mouse in a laptop or how to speak correctly touchpad is a very convenient and undoubtedly necessary element of any laptop. Thanks to him, you can always fully use your laptop in the absence of a regular computer mouse. But sometimes, especially in games, when using a regular wired or wireless mouse, the mouse built into the laptop starts to get in the way. And there is a need to turn it off. In this article, we will tell you how to disable the touchpad in a laptop of any brand and any manufacturer.
Some users have a problem turning on the touchpad. Especially common among Asus laptop owners.
Disabling the touchpad with a keyboard shortcut
On all laptops, without exception, there is a key with which you can quickly turn on and off the touchpad. It is also worth considering the fact that in most cases it must be pressed with the "Fn" button pressed down.
Look for the upper F buttons for a rectangle of the hand and / or touchpad. It is this button that will be responsible for disabling it.
The most common key combinations for enabling and disabling the touchpad with its image are " Fn + F6" and " Fn + F9 ″... If they do not work, then try pressing the key F without Fn.
How to disable touchpad on toshiba laptop?
How to disable the touchpad on a lenovo laptop?
How to disable touchpad on asus laptop?
How do I disable the touchpad on an acer laptop?
It is worth noting that disabling the touchpad may not work due to.
Disable touchpad in bios settings
To disable the touchpad in the BIOS, you need to find the option there Internal Pointing Device which is on the tab advanced.
The touchpad of the notebook helps you control the cursor. If it bothers you, you can block it at any time and then unblock it. We will tell you how to disable and enable the touchpad on a laptop - specific actions depend on the brand of the device and the OS installed on it.
In laptops, a dedicated button or a combination of the two is usually used to disable and enable the touchpad. You can find the one you need by looking at the picture - a rectangle with two fields on top. On a number of laptops there is a separate hardware button for turning off the sensor - it is located on the top or side of the main panel.
ASUS
How to disable or enable the touchpad on an ASUS laptop: try the Fn + F7 and Fn + F9 combinations. One of these combinations will help you both lock the panel and reactivate it.
Acer
On Acer models, the touchpad is disabled in the same way as on an ASUS laptop - with the Fn + F7 combination. The picture on the desired function button here usually depicts a finger brought to the panel.
HP
How to disable or enable the touchpad on an HP laptop: double-click on the top left corner, in which a white dot is drawn or there is a small depression.
Another way for HP is to place your finger in the left corner of the panel on top and hold it for 5 seconds.
Sony
On Sony models, try the Fn + F1 combination. If the laptop has a proprietary Vaio Control Center utility, control the touchpad through it: in the Mice and Keyboards subsection, you can not only deactivate the panel, but also set gestures to call certain functions.
Samsung
On Samsung devices, touchpad control is tied to the Fn + F5 keys.
Lenovo
How to enable or disable the touchpad on a Lenovo laptop: check the Fn + F5 and Fn + F7 shortcuts. The devices of this brand are equipped with panels of the Synaptics type, so you can manage them through a special utility.
Toshiba
At Toshiba, panel controls are usually hardcoded into the popular Fn + F5 combination.
Windows tools
How to turn the touchpad on or off on a Windows 10 laptop: open system options from Start. Go to the "Devices" section and select "Touch Panel". At the top, you'll see a switch that activates and deactivates the touchpad.
Also in this section there is a useful option - whether it is necessary to disable the panel when connecting a conventional mouse.
A number of manufacturers add their own functions to the "Mobility Center" - it opens from the tray, by clicking on the battery icon. If your model has a sensor control unit there, use it to activate the touchpad.
For Synaptics Panels
Many popular laptops have Synaptics sensors, which the manufacturer equips with a proprietary utility. You can find it using Windows tools:
- run the system parameters from the "Start";
- go to "Devices" and select the sub-item "Mouse";
- open "Advanced options";
- if the window has an additional tab with a red icon, use it to control the sensor.
To enable or disable the panel, select it in the list of devices and click on "Activate" or "Stop", respectively. The item "Disable when connecting a USB mouse" will automatically deactivate the touchpad when you plug the mouse into the USB port.
In the dispatcher
Another available option, how to enable the touchpad on a laptop, is through the "Device Manager" function. To run it in Windows 10, hold down Win + X and select the menu item of the same name. In lower versions of the OS, the utility is available through the properties of "My Computer". In the list of devices, find the sensor - it should be in the category "Mice" or "HID Devices".
The name of the panel does not necessarily include the word "TouchPad", it can be referred to as "USB device" or another similar name. To disable it, right-click on the found line and select “Disable” in the submenu; when the panel is disabled, the “Enable” option will be available. If you cannot accurately identify the touchpad in the list, turn off all entries similar to it in sequence - you cannot damage the equipment in this way, in case of an error, just turn the device back on.
Third Party Programs
A little more functionality can be found in additional applications. Touchpad Blocker introduces more flexible settings, but the interface is in English only. The user is presented with the parameters:
- Block accidental taps and clicks - blocks accidental clicks by disabling the panel while typing. Next to it, the number of seconds is set for which the sensor is deactivated after pressing any key on the keyboard.
- Also block move and wheel event - disables page scrolling.
Additionally, you can set hotkeys for launching functions, sound notifications.
In Bios
You should change the BIOS settings as a last resort, when other points did not help, and it is very important for you to completely disable the touchpad for a long time. It is also worth checking the BIOS if the sensor does not respond to pressing, although it is enabled in the Windows settings. What do we do:
- reboot the PC, at the beginning of the boot press Del to start the BIOS;
- go to the Integrated Peripherals tab;
- opposite Pointing Device, change the value to Disabled;
- save settings and reboot.
Conclusion
We figured out how you can control the touchpad on different laptops. The quickest way to use special keyboard shortcuts if they don't work on your model is to use the built-in Windows tools. Leave changing BIOS settings as a last resort, when you definitely do not plan to use the touch pointer anymore.
Prolongation of registration of participants in the "Living Classics" competition!
Who deleted me from friends on VKontakte All friends disappeared from the contact
Which operator was the best in Russia
Double cassette tape recorder
"VK" can be closed for a long time