How to log into a router connected to a router. Connecting to a router to enter the settings. How to find out the IP address of the router if the standard one does not fit

This question arises for everyone who purchases a Wi-Fi router for wireless Internet connection. In order for a device that transmits a signal to mobile gadgets, laptops and desktops to work correctly, you need to change some standard options. It is not at all difficult to figure it out. The main thing is to understand how to enter the router settings. After gaining access to the general menu, you can set a personal connection password so that unauthorized people cannot use your traffic, and set some restrictions. Read on how to do this.

The first thing you need to do is establish a connection between the router and the internet and your computer. To do this, you need to follow a simple algorithm of actions:

• connect the modem to the network;
• insert the plug of the cable of the Internet provider into the corresponding socket;
• connect the router to the PC using a regular network cable.

After completing these steps, the computer will "see" the new network connection and notify you about it. On the router itself, the following indicators should light up:

• the router is on;
• the Wi-Fi signal is broadcast;
• the modem is connected to the Internet;
• the modem is connected to the computer.

You will find the corresponding legend on the panel of the router. If all four indicators light up, it means that the connection to the router is established correctly. It remains only to configure it correctly so that the Internet works on stationary and mobile devices. To do this, you must know how to log into the router and change the standard options.

General instructions for launching the router's web interface

Each Wi-Fi router manufacturer provides an individual interface for controlling modem functions. Outwardly, they differ significantly, but, in fact, the principle is the same everywhere. The user launches any browser available on the computer, enters the address of the router and gains access to the device control page. It sounds extremely simple, but in fact it is not completely clear how to enter the router's website. To set up remote access, you need to know the IP of the router. It must be indicated in the instructions.

If the user manual is not at hand, proceed as follows:

• find the network connection icon on the taskbar and right-click on it;
• a small menu will pop up in which you need to select a control center;
• after completing these steps, a window for configuring network parameters will open, in it you need to find "Changing adapter parameters" (located on the vertical panel on the left);
• after going to the adapter options settings window, you will see a list of connections, among which there will be the one that you need to configure;
• by double-clicking the status window of this connection, click "Details ..."

Having done this, you will see a summary of the data in front of you, in which nothing is clear. In the first column, find "Default Gateway". Rewrite the IP address opposite. This is the direct address to your router. There are two common options used by leading router manufacturers: "192.168.0.1" and "192.168.1.1". Less common is the address "192.168.100.1".

You already know how to enter the router's page, so do it immediately. Enter the appropriate set of numbers in the address bar and you will see the router interface in front of you. The last obstacle remains - authorization. Similar to router addresses, manufacturers set standard username / password values ​​for accessing device options. You can find them out by reading the instructions for the router or by reading the subsequent sections of this article.

Features of individual settings of routers

Using the information contained in this section, you will understand how to access the router's web interface. The data from the table below will provide access to the user's personal account, through which it is possible to easily set a new password for connecting to a wireless Wi-Fi network, set a new name for the router and configure many other parameters.

The data in the table looks monotonous, but there are still some nuances. You need to remember about them in order not to lose the Internet because of such a trifle as a forgotten password. Entering your personal account on the Asus RT-N10 modem is as easy as on Netgear, Beeline, Rostelecom. The same can be said for most routers with Gpon technology. Write down the necessary data for yourself so that you always know how to quickly enter the settings of the router.

Video: how to enter the WiFi router menu

After reading this article, you have already got a general theoretical idea of ​​how to enter the router settings cabinet. It's time to see this process with your own eyes. After watching the video below, you will receive answers to many related questions and can cast aside doubts about the fact that you have misunderstood the instructions. Follow the recommendations from the video and you will certainly be able to configure your modem.

Found a mistake in the text? Select it, press Ctrl + Enter and we'll fix it!

The question of logging into the router from the phone at the addresses 192.168.1.1 and 192.168.0.1 is relevant if there is no computer at hand. There is a solution, because today most modern routers do not require a cable connection for initial configuration, as it was a few years ago. And that means you can do it without a computer at all.

How to connect and log into the router through the phone - 192.168.0.1?

As soon as you turn on the device, it will automatically start sharing unpaired WiFi. The network is usually named by the manufacturer + a prefix in the form of a router ID, for example "TP-Link_1234"

If it is protected, as, for example, in Zyxel Keenetic, then the data for the connection is printed on a sticker located on the router case.

Accordingly, we can connect to it from any laptop or smartphone that has a wireless module.

If the password does not fit, or the standard name of the network has been changed, this means that the device has already been configured before you and to enter the router from the phone, you must first make a full reset with the "Reset" or "Default" button.

Logging into the router from your phone at 192.168.1.1 through a browser

So, our procedure is as follows:

1. We insert the cable from the Internet provider into the port marked as "WAN" on the connector panel of the router
2. Plug it in and turn on WiFi
3. We turn the case over and on the sticker we find the name of the network that it creates by default, as well as the address for entering the administrator section, login and password for entering
4. Now you need to go to the router settings from the phone through the browser using this data, and then configure the connection to the Internet and set the wireless network parameters - in the same way as if you did it from a computer.

Logging into the router from the phone is also identical - by the IP address of the router, which looks like. Which one is needed in your case - we look again at the sticker.

Launch a mobile browser - Opera, Crome or whatever you usually use, and enter "http://192.168.0.1" or "http://192.168.1.1" in the address bar.

How to log in to the router through the app?

The option described above is suitable for absolutely all routers.
However, today more and more manufacturers of network equipment come to develop their own cross-platform mobile applications in order to make the process of setting up a router via a phone more convenient and intuitive.

If you want to configure your Wi-Fi router yourself, change the password, the name of your wireless network, or other settings, then in any case, you will first need to go to the router settings. To the control panel, where you can set the desired parameters. I want to say right away that this is not at all difficult. It doesn't matter which router model you have and which manufacturer (Tp-Link, D-Link, Asus, Linksys, Zyxel, etc.), according to this instruction you will be able to enter the control panel. The principle of operation of all routers is practically the same, which means that we can get access to the settings according to the same instructions. Yes, there are some nuances, we will definitely consider them.

A router is a self-contained device that runs on its own software. And access to it can only be puffed over a network cable (In most cases)... Many people have a question, what kind of disk comes with a router, driver? No, there are no drivers. For a router, drivers are not needed at all. As a rule, the disk contains a special utility with which you can quickly configure the router. But, I would advise you to configure the router through the settings, which can be accessed through the browser. And as I wrote above, this is very easy to do.

We will consider two methods: access to the control panel via a network cable, from a computer or laptop, and access to settings via Wi-Fi from mobile devices. (or also from a computer)... I advise you to use a network cable and a computer for this business. But, if this is not possible, then you can change some settings, or even completely configure the router from a phone, tablet, or laptop via Wi-Fi. If you want to update the firmware, then you cannot do this via Wi-Fi.

How to enter the router settings from a computer

I saw many articles where they describe some difficult steps that need to be performed from the very beginning (checking network settings, getting the IP address of the router through the command line)... You don't need to do this, at least not yet. First you need to try to go to the settings. If it does not work out, then we will already look at the possible reasons. Why bother with unnecessary nonsense.

We connect the computer to the router

We take a network cable, which usually comes with a router (you can use your own cable) and connect one end to the network connector of your desktop computer or laptop. Photo for clarity:

We connect the other end of the network cable to the router in one of 4 (usually) LAN connectors. They are yellow. For example:

Typically, the settings can be accessed at, or. The address of your specific router and the login and password, which will be needed further, can be viewed on the router itself. Usually, they are written on the bottom of the sticker. The address of the type can also be specified there. For example:

The router must be turned on. Next, open any browser on your computer. You can even use Internet Explorer, I have Opera. To enter the settings, we need to write the IP address of the router in the address bar of the browser 192.168.1.1 , or 192.168.0.1 , and go through it by pressing the button Enter... A window will appear asking for a username and password. Again, the default is usually admin and admin... You can also see this information from the bottom of the device.

If you changed the username and password to enter the settings (not to be confused with a password for a Wi-Fi network), then you need to specify them. And if you forget them, then you have to do (article on the example of Tp-Link), and re-configure it.

If you cannot find the IP address, username and password of your router, then try to go first to 192.168.1.1, and then to 192.168.0.1. Try login admin, as well as password. Also, try to leave the password field blank, or specify 1234.

Set the required parameters and press the button Login to the system, or simply entrance, no matter. The window itself may look different for you, this is also not important.

If all is well, then you will see the settings for your router.

If not, now we will try to find out what the problem might be. Scroll down the page.

We go to the control panel via Wi-Fi: from a phone, tablet, laptop

If, for example, you do not have a network cable, or you do not have a single computer at hand, but you need to go to the router's settings, then you can use a Wi-Fi connection for this.

One important point: when connecting via Wi-Fi, and not via a network cable, you can make some settings in the same way, or even set up a new router. But, in any case, do not update the software of your router. By doing this, you can simply break it. Flash only when connected via cable. Instructions for and for.

In principle, we do everything in the same way as I described above, starting from the moment when we launch the browser, go to the IP address of the router, etc. The only difference is that we connect to the Wi-Fi network of the router, which we need to configure , not by cable. We take our phone, laptop, or tablet, and connect it to Wi-Fi (if not connected)... If, for example, you want to connect to a new router, that is, it will have a standard name and will be unprotected.

I will show you using the example of entering the control panel from the tablet. In the same way as on a computer, open any browser and go to the IP of your router (192.168.0.1, or 192.168.1.1)... We indicate the login information.

Settings should open.

That's all, as you can see, everything is very simple. If something doesn't work out, ask questions in the comments.

Doesn't go into settings: possible causes and solutions

I wrote in more detail about this problem in the article. But, since the problem when the router settings do not open and it is impossible to go to the address 192.168.0.1 and 192.168.1.1 is very popular, I think that this information will definitely not be superfluous. Let's take a look at the most common problems:

When you try to go to the IP address 192.168.0.1, or 192.168.1.1, you receive a page not access error, or the page could not be opened.

This means that the computer cannot connect to the router. It doesn't matter if it's cable or Wi-Fi. First of all, check if there is a connection. Look at the notification bar (in the lower right corner), to the connection status. If you are connected by cable, then a computer should be drawn there, it may be with a yellow icon, this is normal. If you connect via Wi-Fi, then there should be just a white network (network level). It can also have a yellow exclamation mark.

Solutions:

• You need to check the network settings on your computer. Perhaps you have there in the local network settings (when connected by cable), or wireless (Wi-Fi connection), some static IP settings are specified, or other parameters. It is necessary to set the automatic obtaining of IP and DNS. I already wrote about this in detail in the article.
• If the connection is by cable, then you need to try to replace it. More than once I have met cases when the problem was precisely in the cable. Or connect via Wi-Fi.
• If you have Wi-Fi on your computer, and you are connected via cable, then you need to completely turn off Wi-Fi. And vice versa, when connecting via a wireless network, the cable is disconnected.
• If all else fails, do it, perhaps it contains some non-standard connection settings.
• Also, it is not necessary to exclude the breakdown of the router itself. Sometimes it happens.

Invalid username / password. Or nothing happens after clicking the Login button.

There may be such a problem. We went to the address, a window appeared with a request for data, you specified them, but an error appears that the login data is incorrect, or the page simply reloads.

Solutions:

• Try different variants of the login / password pair. Admin and admin, try leaving both blank, or just the password. Will try to specify the password 1234.
• Try using a different browser.
• Most likely you will have to reset the router settings (I gave the link above).

Afterword

There are many manufacturers, and even more models of different routers. And almost everyone has their own nuances regarding the settings. But, the very process of entering the control panel is almost the same for everyone. Hope this tutorial helped you get into the settings of your router. If you have any problems, write in the comments, we will figure it out together.

A router is a convenient solution for building a local and wireless network, which allows you to simultaneously access the Internet from several devices. However, in order to configure the router, you first need to install it correctly and go to the web interface, where the main parameters of the equipment operation are indicated.

Equipment connection

Before entering the router settings, you need to properly install the equipment. You will need:

• Router.
• Network cable.
• Network card on the computer.

Any user can handle the installation of a router - the main thing is to carefully examine the ports and figure out what they are for. Explanatory labels and different colors of connectors will help in this.

1. A cable is inserted into the WAN / Line / Internet port, which the provider has led into the room (usually it is blue).
2. One of the LAN ports (mostly yellow) is equipped with a network cable that comes with the router. The other end of the patch cord connects to the computer's network card.
3. The power cable is plugged into the appropriate connector.

After all the wires are in place, press the power button. If everything is done correctly, several indicators on the router will light up: power, network connection and computer connection.

Configuring the router in the system

To open the router interface, you need to set up a network connection. Usually the necessary parameters are set automatically, but it will be useful to check their correctness.

These are standard settings that allow the router to independently assign an address to the connected device (computer in this case) using a DHCP server.

Login to the interface

After connecting and configuring the equipment, you can proceed to resolving the issue of how to log into the router. Almost on all routers, the interface address, login and password are indicated on the label located on the bottom of the device.

If there is no sticker, then you can view the address to be displayed in the browser of the router's web interface using the software:

1. Open the "Network and Sharing Center".
2. Proceed to change adapter parameters.
3. Double click on the local area connection icon.
4. Click Details and look at the Default Gateway value.

If you yourself changed the username and password, but cannot remember the new values, then use the Reset button on the router to reset its settings to the factory settings. After resetting the parameters, the credentials will become the default - admin / admin.

It is not necessary to look at the address of the router. Most manufacturers use the same address, so the order of launching the interface of routers of different models does not differ much.

For example, TP-Link and D-Link routers use the IP address 192.168.0.1. After entering this value, an authorization window appears in the address bar of the browser - you need to register your login and password in it. For some models of D-Link Dir routers, you only need to specify a login, the password string can be left blank.

Asus and Netgear routers have the default address 192.168.1.1. The login and password are also usually standard - admin / admin. But there may be options: for example, for a NETGEAR WGR614 router, the login will be “admin”, and the password will be “password”.

For Huawei routers, the login information is slightly different from the usual values. The address for entering the interface is 192.168.100.1. The login and password are also not quite standard - root and admin, respectively. Some models have even more complex authorization pairs.

Zyxel Keenetic routers have an easy-to-remember address my.keenetic.net. Alternatively, the standard address 192.168.1.1 is used. The login will be the word "admin", and the password for the standard settings is 1234.

It seems that you can get confused, but in reality everything is simple. In 90% of cases, the address will be 192.168.0.1. or 192.168.1.1, and the pair for authorization is admin / admin. If these values ​​do not allow you to open the web interface, then carefully read the instructions - the address, username and password are always indicated there.

Possible login errors

If you cannot enter the settings of the router using automatic settings, then try setting the login parameters manually using the IP address of the router.

Knowing the IP address of the router, you can manually specify the TCP / IPv4 parameters:

To understand what values ​​you need to specify, let's take the IP address of the router - for example, 192.168.0.1. Based on this address, fill in the lines as follows:

• The IP address is 192.168.0.2 (the last digit must be in the range 2 to 254).
• Subnet mask - 255.255.255.0 (always remains unchanged).
• The main gateway is 192.168.0.1 (the address of the router is indicated here).
• The preferred DNS is 192.168.0.1 (the address of the router is also written).

With these settings, the problem of launching the router's web interface through a browser should be resolved. Then you just have to set up the Internet and create a wireless connection so that the Wi-Fi router begins to perform its functions of providing constant access to the network from different devices.

Hey! In almost every article in which I write about setting up routers, or about solving some problems with wireless networks, I write about how to enter the control panel of a router to change some parameters, etc. And to be honest, I'm already tired of constantly writing the same thing :). So I decided to write about this in a separate article. Yes, and there is nothing to write about here, but still, many have problems with this.

On almost all routers, even from different firms, the entry into the settings is almost the same. But I will show using the example of TP-Link devices.

Let's first figure out how the router should be connected. Everyone (including myself) recommend connecting to a laptop at the time of setup. But, if you just want to make some settings, then you can connect wirelessly and even from a phone or tablet, nothing bad will happen.

Not when connected via Wi-Fi! Network cable only!

This is understandable. You must be connected to your network. Via cable or Wi-Fi.

We go to the control panel

Open any browser. Internet Explorer is also possible, but Chrome, Opera, etc. are better.

Now attention! Take your router and look for a sticker on it that says different information (model, version, etc.).

We need to look there IP address (usually 192.168.0.1, or 192.168.1.1) and password login to access the settings. If you have not changed them, then it is most likely admin and admin.

As you can see, I have IP: 192.168.1.1... So we type this address in the browser, in the address bar, and go to it.

A window should appear asking for a password and login.

Enter the username and password that are written on the router. Not to be confused with a password for a Wi-Fi network!

If you have already changed this data during the setup process, then most likely you will have to do so that the password and login are again the default.

After pressing the button send we get into the settings. Depending on the model (firmware versions) and manufacturer, they may differ.

If you have any problems, then be sure to read this article -