Asus tablet won't start. The tablet turns on but does not boot. The tablet is dull and freezes - speed it up

  • 06.05.2022

Each tablet owner may have a problem with the operation or turning on the screen. Of course, this problem can be easily solved by simply taking it to the workshop. There, experienced specialists for a fee will be able to bring your gadget back to life again. But there is another option, you yourself can diagnose and determine why the screen on the tablet does not work.
Before starting the diagnosis, you need to determine the nature of the problem itself. It can be of two types, this is mechanical damage to the screen, which could result from certain actions or a software failure. As a rule, mechanical damage can be seen with the naked eye. In such cases, it is better to give your tablet to the master, because without experience and certain skills it will be difficult for you to fix it.
Another nature of the problem is a software failure. It can occur for many reasons. For example, the tablet stopped turning on after it was charged, or after installing any applications or games. Also, a failure can occur as a result of visiting dangerous sites. In this case, the problem can be solved independently without any outside help and additional expenses.
Before you start restoring your tablet, make sure that it has not suffered any mechanical damage. Then you should disconnect the battery of your device and wait a few minutes. Next, you need to insert the battery back and try to restart the tablet. This procedure allows the gadget's operating system to completely reboot. Very often, this is enough for your assistant to start functioning normally again.
If this procedure was useless and the tablet screen is still not working, you should try to reset all settings to factory settings. Almost all tablets have this function implemented by simultaneously pressing the power off and volume control keys of the device. If you did everything correctly and the reason is a software failure, your tablet should vibrate, and a menu with settings will appear on its screen. In the menu, using the volume keys and the power button, select the item: Settings - Formatting the system - Reboot the system. After that, your gadget will start again, but all previously installed games and applications will be deleted on it. Thus, you will roll back all settings to the original level.
If the tablet does not respond to keystrokes, you should read the instructions for it. Each device should have its own emergency method for rebooting the system. Before resetting all settings, it is recommended to remove sim cards and memory cards from it.
If the method you found in the instructions does not work, you need to take the tablet for flashing. In such a simple way, you completely reinstall the entire operating system of your gadget. It is better not to try to reflash the tablet yourself, this can lead to more disastrous consequences.

Sometimes situations arise when your tablet stops working normally. Let's look at the question, why does the tablet turn on but not boot up?

Navigation

If your Android tablet suddenly stopped working, then the reasons may be hidden in software or hardware. The first reason is the inability to turn on due to damage to the battery, board or cable. The second lies in the errors of the operating system and since it was not installed correctly, then when installing any program, the device may simply not turn on.

What to do if the tablet does not turn on at all?

First, check that your device is charging. By the way, this is one of the most common reasons. In such a situation, simply put the tablet on charge and wait for a while until the tablet has enough power to turn it on. After that, try to turn on the device. Sometimes it doesn't work the first time, so press a few. In addition, you must be sure that the device is working. If nothing happens, then check on another tablet if the charger is working, and also try using another one.

Think about whether someone else took your tablet? For example, a child. Maybe he accidentally hit him and damaged the screen. Then the tablet may start, but you do not see it because of the damage. The same situation can be with any fall of the tablet. In this case, on your own you will not help him in any way. Usually, if the screen is damaged, everything is immediately visible.

If the tablet did not fall, and the screen is not damaged, but there is still no image, then the video adapter is probably broken. If you still have a warranty on it, then take it to specialists and do not worry. Of course, you can try it yourself, but if problems occur, the warranty will no longer be valid.

What to do if the tablet does not turn on completely?

The tablet does not load - what to do?

Here the reason is only a software failure. In this case, the screen backlight will turn on, and then there will be an endless download, or you will see a picture with a broken robot.

This situation occurs due to:

  • Incorrectly installed program
  • Forced termination of some processes responsible for the stable operation of the system
  • By the way, if you enabled the process through a third-party application, this problem may also appear.

What to do?

Video: what to do if the tablet does not start


Yesterday everything was fine with the tablet, but today you suddenly found that it does not want to turn on at all. What is the reason? And, most importantly, how to "bring a friend back to life"? More on this later.

Carefully study the appearance of the tablet. The detection of various kinds of mechanical damage may indicate that the device was dropped, and it was because of this that it stopped turning on. In this case, only contacting a specialized service center will help to cope with the problem.

  • Put your tablet on charge. It is likely that it is the complete discharge of the battery that is the reason why the device refuses to give "signs of life". If the tablet does not respond to charging within an hour, the problem is either in the battery, or in the charger, or in the charging connector. If possible, try to charge the gadget with another block. Otherwise, you will have to contact the service center.
  • Press together the power/lock keys of the tablet and the volume up key. Hold for a few seconds. This combination in most cases is responsible for resetting the device to factory settings or for its “emergency” activation.
  • If the previous method did not help, reset the settings differently. To do this, press the Reset button (it is convenient to do this with a small sharp object).
  • If, after the manipulations done, the tablet did not turn on, at home, in the absence of the appropriate repair skills for such electronics, you are unlikely to restore it. Contact professional repairmen for diagnosis and appropriate remedial action.

The tips for checking the charger, connector and battery remain the same for both the previous and next case. The focus here is on software issues.

  • Press the power button and the home button together. Hold for about 10-15 seconds and release. Press the power button. Appeared branded apple? Great, the tablet will boot up soon.
  • Try restoring your iPad using iTunes. To do this, connect the device to a computer / laptop via the appropriate cable and run the mentioned program. Press the iPad and Home buttons together. Wait for the company logo and the recovery mode menu to appear on the tablet display. The program will offer to restore or update the system. Choose the second option and wait for the next notification. If after 15-20 minutes iTunes does not report anything comforting, repeat the above steps in the same order.
Do home resuscitation methods not help? It remains only to contact the service center.


If attempts to charge the battery and then turn on the tablet were unsuccessful, follow the instructions below.
  • Press and hold the button responsible for turning on the tablet for about 30 seconds.
  • Press and hold the power and volume up buttons for at least 15 seconds. Keep pressing the buttons even if any logo appears on the tablet screen.
  • Release the buttons after at least 15 seconds, wait about 10 seconds, and then try to turn on the tablet again.
    By following the above steps, you will completely turn off the device and turn it on again, eliminating confusion in the work / sleep / hibernation modes, etc.

If the device starts up, the lack of reactions to previous attempts to turn it on may indicate a severe battery discharge. Let it charge at least 40%, install the latest updates and do not ignore this moment in the future.

If the tablet does not turn on, the problem is most likely hardware and requires qualified intervention. Contact a specialized service.

To date, tablet computers have long ceased to be a luxury, now they have become available to the mass consumer. It is regrettable to admit it, but not a single tablet computer is immune from all sorts of breakdowns and problems.

All problems that arise with tablet computers can be divided into two main categories: hardware failures and software failures. The latter are associated with violations of the operating system of the tablet, and the first - with violations and breakdowns of the "stuffing" of the gadget.

Causes of hardware failures are all kinds of physical damage. In the event that you drop or hit the tablet, hardware failures may not appear immediately. The device may work normally for a while, but then it may not turn on after a reboot is performed.

Your tablet won't turn on?

Remember first of all whether you dropped or hit it not so long ago. You should also inspect the gadget for external visible damage. In the event that you find scratches or, moreover, cracks on the surface of the tablet, you need to take it to a service center, since it is better not to engage in self-repair.

Repairs should be left to a specialist.

In the event that you do not find any visible damage, a possible reason that the tablet computer does not work is software failures of the Android OS. It is necessary to press and hold the power button for about 15 seconds, and then try to turn on the device by pressing the button.

In the event that this action does not help, you can try restarting the device manually. Each tablet has a reset button, most often it is small and securely recessed into the computer case to avoid the possibility of accidental pressing. You can press the button with a sharp object - a toothpick, a thick needle or a paper clip. However, the button must be pressed very carefully without damaging it.

In the event that a simple reboot did not help your tablet, you can use the "hard reset" method. This technique performs a system rollback, returning the operating system to its default factory settings. This reboot will remove any application that you have installed, as well as files that are downloaded directly to the tablet's memory. Accordingly, this is an emergency method only for those situations where a regular reboot does not help.

Each manufacturer, and sometimes even each model, has its own combinations to perform such a “hard reset”. Most often, you need to simultaneously hold down the power button or the reset button, as well as one or more buttons. The button combination is indicated in the instructions for the tablet computer or can be found on the Internet. Before performing such a reboot, it is better to sting the memory card and SIM card from the tablet. After pressing the combination, a menu will appear on the screen of your tablet, in which you should select Settings - Format System - Reset Android.

If this technique did not help your tablet, you can reflash it - install the operating system again. If you have never done it yourself, it is better to contact a specialized service center, as Android installation differs depending on the tablet model.

If the tablet starts up, but its screen remains dark, most often the cause is a malfunction of the video adapter. In this case, you also need to contact the service center.

An unpleasant situation can happen to everyone when the tablet dear to the heart turns off and does not turn on. When this happened to my old Chinese, who always limped on both legs, I wasn’t particularly surprised, but if it’s a cool branded asus nexus 7, sony xperia, fly, alcatel, irbis, dexp, 3q, at least prestige or digma - a similar situation can't be stressful.

But it is always important to neither get frustrated nor lose your temper and take the necessary measures in order to diagnose problems and, to the best of your ability, correct them. So in this article we will analyze the question of what to do in the case when the tablet does not turn on.

First of all, we will try to determine what the first symptoms were and what preceded the onset of the problem.

What programs did you install before the crash happened? Perhaps the tablet stopped turning on immediately after installing a particular application? Or has it often happened to him that he takes a long time to load after updating the operating system? If the android has not been updated for a long time, nuances may also arise with this. Has it happened before that the tablet does not load beyond the logo?

In general, try to remember everything that happened on the eve of the incident. This will greatly help the diagnosis.

The most common reasons

The causes of this particular problem can be very diverse. I will try to describe the most common ones, after which we will analyze the options for solving the problem. First of all, you need to structure the reasons, dividing them into two large groups:

  • hardware (meaning the situation when the breakdown is in the hardware part. This option is worse);
  • software (if something is wrong with applications or the OS. This is also unpleasant, but not so bad. Often you can even fix it manually).

The "best" reason

It is possible that you simply did not charge the tablet and after it is completely discharged, it does not work. More serious causes will be described below - software conflict and physical damage - so you really need to want it to be a simple release. Perhaps you used someone else's charger that does not fit with your model, the tablet is discharged, cannot receive additional recharge and therefore does not start.

If in this case you are wondering how to turn on the tablet, simply connect it to a network or computer by changing the USB to your native charger, wait 20-30 minutes and then press the Power button. Does not react? Move on.

Hardware breakdowns

This concept refers to mechanical injuries and damage inside the case. Diagnosing the first is much easier: if the tablet fell and does not turn on, you have a mechanical failure. Check it out for:

  • cracks on the screen - they will be easy to notice;
  • cracks in the hull;
  • the volume and power buttons stuck, as well as the USB and headphone inputs;
  • when you turn it on, you can sometimes notice stripes on the matrix. This often happens when the video card burns out.

If you can’t remember the moment of injury to the device and you can’t find anything on the case, the problem may also be overheating of the components. It cannot be checked from the outside, and you will have to contact a service center for help (or a local technician if the service life has ended). Before doing this, try to weed out all other possible sources of problems with the tablet if it blinks and does not turn on.

Software conflicts

The second group of things to worry about are third-party apps. It's not as scary as burning iron inside, but it can also bring a lot of trouble. Various bad things can happen due to conflict between different software if you install a lot of software on your device.

In addition, Android is also not an ideal system and problems can occur based on its updates that are not adapted to your specific device. This, of course, does not mean that you need to stop updating the OS, on the contrary, such actions will even more likely lead you to problems with the tablet.

But if the tablet stopped turning on immediately after the system update, then everything is clear. Go to the official website of the manufacturer and look for a stable firmware version for your device. If this is beyond your power, contact any technician.

It is easier to diagnose a software conflict if it occurred immediately after installing/updating a specific software. Otherwise, we can only try to weed out this possibility by performing the actions described below.

What is in our power

It is clear that fixing a burned-out video card will not work. But there are actions we can actually take to help our Pocket PC. If the breakdown is a conflict with third-party software or a crashed system, you can even reanimate the tablet yourself, without contacting a service center.

In the case when you dropped the tablet and it stopped functioning, you can try to do the following, but this is unlikely to help and save you from going to the service.

First of all, put on recharging for 20-30 minutes. If the device is completely empty, then it will not function anyway, and all actions will not have an effect.

Hold down the power key for 10-20 seconds. If the tablet turns on, but does not boot up, that is, it does not turn on completely, try rebooting: hold down the power button and look at the reaction. If nothing happens, or if he did not respond at all after pressing the key for 10 seconds, look for Reset on the case.

Usually this button is made sunk into the body to prevent accidental pressing, and you can only poke it with something oblong (about a needle in diameter. Unwind the paperclip). If your device has it, poke and hold for a few seconds. Wait 10-20 seconds and try turning it on.

If there is no Reset, you can try to remove the battery (only if provided by the manufacturer) or hold down the key combination "On / Off", "Volume Up", "Home" at the same time (which returns to the desktop).

We wait 10-20 seconds, try again.

Switching to recovery mode - Recovery

Depending on the version of the android and on the model of the device, a different key combination may be used to switch to Recovery mode. Usually this is the first or second option, but there are exceptions, so try it in turn.

Legend: Home - returns to the desktop (main screen) in the norm; Power - on / off button / sleep mode; Vol + - increase the volume, often the upper or right side of the Volume key (volume control); Vol- is the volume down button, often the bottom or left side.

Combinations can be:

  1. Power, Vol+;
  2. Power, Vol-;
  3. Power, Vol-, Home;
  4. Power, Vol+, Home;
  5. Power, Vol+, Vol-

The system menu appears. We are looking for an item similar to “Wipe data”, select it (confirm the selection with the power key), then Yes. The main menu should load, look for the Reboot item and select it. We are waiting for a reboot.

After all, the tablet should start. Not all, just a few left. We go to the settings, the item "Backup and reset". We select, we discard.

Safe mode

If the device starts but does not function, you can try this. Hold Power until the shutdown menu appears. For androids 4.1 and above: Poke and hold the "Power off" button. For androids 4.0 and below: while the manufacturer's logo is turned on and displayed, hold down both volume buttons until the desktop appears.

In both cases, the Enter Safe Mode dialog box will appear. Click "Yes" or "OK". We wait.

When the desired mode starts, the system should return to normal, all third-party applications will be unavailable. It is recommended to remove them all cleanly and, if possible, check Android for viruses.

If you still have unresolved problems and none of the methods helped, you should contact the service center. If you have a solution that is not described above, please describe the situation in the comments - you will be of great help to many of our visitors.

Conclusion

I hope our tips have helped you. Try the generic algorithm described above. See you on the pages of the site!

Video instruction