Prints hp m1132 mfp printer. Troubleshooting HP LaserJet M1132

Nowadays, almost many have their own printer. As a rule, sooner or later, the printer, like any other technique, can malfunction and malfunction. Errors usually occur as a result of worn parts or improper operation.

Often the cause of the breakdown can be determined on your own, but nevertheless, it is best to entrust this business to professionals, since only they will be able to carry out high-quality diagnostics and repair of your printer.

What will be discussed:

Laser printer

Nowadays, laser printers are in great demand. They have many advantages and are superior to conventional inkjet printers in terms of capabilities. As a rule, a laser printer is most suitable for office work, since its device is capable of withstanding heavy loads on a daily basis, which is important for this type of work.

A laser printer is a page-by-page device. It is capable of printing over 150 pages per minute. The photo shows how the HP Laserjet M1132 MFP printer looks like.

Most modern laser printers are subject to the same malfunctions. The HP Laserjet M1132 MFP printer error can be caused by excessively dust or other contaminants on the surface of the parts. Therefore, as a preventive measure, experts recommend cleaning the internal surfaces of the printer from time to time.

Also, the installation error of the HP Laserjet M1132 MFP printer can often be directly related to the settings or the installed driver.

Installing the appropriate driver on your computer

It is worth noting that the operation of the printer depends on the settings and the driver. Therefore, you need to install only the drivers that are suitable for your PC. If you encounter problems while installing the driver, you need to find out the error code and try to fix it yourself. If this fails, then it is best to contact a specialist.

It is easy to guess that all possible errors appear as a result of various factors. This suggests that the solution to the problem will directly depend on the cause of its occurrence. Therefore, it is worth examining the most common mistakes and how to solve them separately.

HP Laserjet M1132 MFP E2 error

Typically, the E2 error appears when the cartridge door is open. To solve the problem, you need to check if the cartridge door is closed. E2 malfunction is the most common in comparison with others.

HP Laserjet M1132 MFP E3 error

The reason for the appearance of the E3 error on the HP printer may indicate problems with the cartridge (absence or incorrect installation).

How to fix error E3?

Usually this error is accompanied by loud noises (crackling, clicking). You can confirm that there is a problem with the cartridge by removing it. If after that the printer no longer makes sounds and does not write an error, then the reason has been found, and you just need to install a new cartridge.

In any case, the E3 error occurs as a result of incorrect replacement of the cartridge. Therefore, before the first replacement, you must study the instructions supplied with the printer. Initial, visual inspection of the cartridge and its socket will also help to avoid the appearance of this error and further incorrect operation of the printer.

HP Laserjet M1132 MFP E8 error

The appearance of the E8 icon may indicate a fatal error. Basically, the E8 error leads to a complete stop of the printer, since it cannot recover, or turn on. Very often this malfunction occurs as a result of a malfunction of the interface board.

Correction of error E8

You can solve this problem yourself. To do this, you need to take several steps:

1. turn off the printer and disconnect the cable;
2. wait at least 1 minute and turn on the device;
3. then you need to wait until the device is initialized.

If these actions did not solve the problem, and the error recurred, then you should contact the repair center. Since if you try to fix your printer yourself, you can injure him, which will affect his future work.

Let's consider other possible problems with laser printers:

1. Fuser malfunction. Usually, when the device is turned on, the device panel displays all 3 LEDs. If this problem occurs, the printer will make a distinctive squeaky sound during printing. Also, after printing, the drive rotates for a very long time.
2. Failure of the laser scanner. White streaks or faint streaks appear when documents are printed on paper.
3. Deterioration of paper transport mechanisms. An orange icon appears when this problem exists.
4. Failure of the interface board. In this scenario, the printer stops turning on.
5. Defective gearbox. During operation, the device makes a huge noise and turns off when the drive rotates.
6. Transfer roller worn. A faint print will be observed.
7. There is a problem with the paper transport. This is confirmed if the paper does not reach the fuser, but gets stuck.
8. Duplexer error. No paper jams during printing and remains on the duplexer.
9. Malfunction of the main electronics board. In this case, the device stops turning on, or turns on, but does not print.
10. Thick or poor quality paper. Typically, when using the wrong paper, the printer prints documents, but the image is dull and easily washed off with your finger.
11. Dirty paper path. The product works, but it squeaks when it prints.

All of the above problems can be corrected by replacing or cleaning the corresponding parts. Diagnostics of the HP Laserjet M1132 MFP should be done only if you have knowledge of this technique. Since the inside of the laser printer is very hot during operation, it is dangerous to open the device immediately after printing. In addition, improper actions can damage the printer, which will affect its future work.

If the device is not performing well, follow the steps in the checklist sequentially. If the device does not pass a certain stage, proceed according to the recommendations for elimination of errors. If a specific action resolves the problem, the rest of the steps in the checklist can be skipped.

Troubleshooting checklist

1. Make sure the device is configured correctly.

a. Press the power button to turn off auto shutdown or turn on the device.

b. Check the cable connections to the power supply.

v. Make sure the line voltage matches the device's power configuration. If an extension cord is used and the voltage does not meet the specifications, plug the device directly into a wall outlet. If the device is already plugged directly into a wall outlet, try using a different outlet.

d. If none of these steps restore power, contact HP Customer Support.

2. Check cable connections.

a. Check the cable connection between the device and the computer. Check the connection is secure.

b. Check the cable for damage by replacing it with a different one, if possible.

v. Check the network connection Check if the network indicator is on. The network indicator is located next to the network connector on the back of the device.

If the device still does not connect to the network, remove the device from the system and reinstall it. If the error persists, contact your network administrator.

3. Series М1132. Check if any lights on the control panel are on. Including whether it is serviceable and buy if necessary.

Check if any messages are displayed on the control panel.

4. Make sure the paper you are using meets specifications.

5. Make sure the paper is loaded correctly in the input tray.

6. Make sure the device software is installed correctly.

7. Make sure that the printer driver for this product is installed on the device and that you are selecting the device from the list of available printers.

8. Print a configuration page.

a. If this page does not print, check for paper in the input tray.

b. Make sure it is installed correctly.

v. If paper is jammed in the product, clear the jam.

d. If the print quality is not satisfactory, follow these steps:

Check the print settings for the media you are using.

Solve print quality problems.

9. Print a small document from another application that previously printed normally. If the document prints normally, the problem is with the software you are using. If the problem is not resolved (the document does not print), follow these steps.

a. Try to print the job from another computer that has the product software installed.

b. Check the cable connection. Specify the correct port for the device, or reinstall the software, choosing the type of connection you are using.

Factors affecting device performance

Several factors affect the print time of a job.

Using special paper (for example, transparencies, thick paper, and custom-sized paper).

Processing and loading time of the device.

The complexity and format of the graphics.

The speed of the computer you are using.

Network connection or USB cable connection.

Device I / O configuration.

Restore factory default settings.

Restoring factory defaults returns all device settings to factory defaults, clears the fax header, telephone number, and all fax numbers stored in the device memory.

Restoring factory defaults returns all device settings to factory defaults, clears the fax header, telephone number, and all fax numbers stored in the device memory. Also, this procedure clears the fax phone book and deletes pages stored in the machine's memory. Then, according to the procedure, the device automatically restarts.

1. On the control panel, press the Install button.

2. Use the arrow keys to select the Service menu, and then press the OK button.

3. Use the arrow keys to select the Restore Defaults option, and then press the OK button.

The device will automatically restart.

Interpreting the location of the control panel lights

If the product requires service, an error code appears on the control-panel display. Indicator Symbols

Indicates the status when the indicator is off

Interpreting Control Panel Messages

Control Panel Message Types

Alerts are only displayed for a specific amount of time. They may require the user to confirm the job by pressing the OK button, or to cancel the job by pressing the Cancel (x) button. Some warnings prevent the job from completing or affect print quality. If an alert is associated with a print job and Auto Continue is enabled, the product will resume the print job without confirmation after a 10-second pause during which the alert will be displayed.

Fatal error messages indicate some kind of failure. Turning the power off and on may solve the problem. If the critical error persists, the device may need service.

Possible locations of jams

Jams can occur in the following locations.

Document Feeder

Internal cavities (open the door leading to)

Media jams can occur in one of the following locations.

Clear paper jams in the document feeder

1. Open the cover of the document feeder

2. Carefully remove any jammed paper. Try to remove the page carefully without tearing it.

3. Close the document feeder cover.

Clear jams in the output bin area

Do not use sharp objects such as pencils or scissors to clear jams. The warranty does not cover damage caused by sharp objects.

Lift the scanner assembly and open the door.

2. Remove it.

While holding the access door open and grasping the edges (or the middle) of the jammed media with both hands, carefully pull it out of the printer.

4. Install it.

Clear jams in the input tray

2. Remove it.

3. Remove the stack of print media from the input tray.

4. With both hands, grasp the visible part of the media (including the middle part), and carefully pull it out of the product.

5. Install it.

6. Close the door and scanner assembly.

Clear jams inside the product

1. Lift the scanner assembly and open the door.

2. Remove it.

3. If you can see the jammed paper, carefully grasp it and slowly pull it out of the product.

4. Reinsert.

5. Close the door and scanner assembly.

Change the setting for clearing paper jams

If Clear Jam is enabled, the product will reprint the page that was damaged by the jam.

b. Right-click the driver icon and select Properties.

b. Right-click the driver icon and select Properties.

a. From the Apple tk menu, click the System Preferences menu, and then click the Print & Fax icon.

v. Click the Options button.

2. Select Auto or Off. under Clearing Paper Jams.

Troubleshooting Paper Handling Problems

The problems below can cause poor print quality, media jams, or damage to the product.

Media is not loaded correctly, or the input tray is full

Turn over the stack of paper in the input tray, or try rotating the paper 180 degrees in the input tray.

Make sure the paper is loaded correctly and the guides are not too loose or not squeezing too hard on the stack of paper.

There may be a jam in the paper path.

Clear any paper jams.

The paper does not meet HP specifications.

Air inside envelopes can cause wrinkling.

Remove the envelope, straighten it, and then print again.

Toner appears around the printed characters.

The paper might be loaded incorrectly.

Turn the stack of paper over in the tray upside down.

If a lot of toner is scattered around the characters, the paper might have high resistance.

Use other paper, such as high quality paper made for laser printers.

The image at the top of the page (in solid black) appears further down the page (as a gray box)

The printing of the image may be affected by program settings.

In the program, change the tone (darkness) of the field in which the repeating image appears.

In your software program, rotate the entire page 180 degrees to print a lighter image first.

The order of the images may be affecting the print quality.

Change the order in which the images are printed. For example, place a lighter image at the top of the page and a darker one at the bottom.

The device may have been affected by a power surge.

If the problem occurs with the next print job, turn off the printer for 10 minutes and then turn it back on to resume the print job.

Copies are blank or very faint.

There may be a defect in the printer.

The original is of poor quality.

Sometimes when copying documents that are too light or damaged, even adjusting the contrast will not produce a good quality copy. If possible, find a higher quality original.

The contrast might be set incorrectly.

Use the control panel menus to change the contrast setting.

The original is used with a colored background (purchase of inkjet cartridges for printers hp, epson, canon, brother, purchase of inkjet cartridges from the printer, prices, departure).

Colored backgrounds may cause the background and foreground image to merge, or the hue of the background may change. If possible, use originals without colored backgrounds.

Repetitive defects scale

If defects appear at regular intervals on the page, use the following scale to determine the cause of the defect. Align the top of the scale with the first defect on the page. From the mark that matches the next similar defect, the faulty component can be identified.

If the defect is in the printing mechanism or fuser, then the device needs service. Contact HP Customer Support.

Repetitive defects scale

Optimizing and improving image quality

Changing the Print Density

1. Changing the default print settings is done using the printer driver. To do this, follow the instructions in the appropriate procedure, depending on the operating system installed.

Windows XP, Windows Server 2003, and Windows Server 2008 (using the default Start menu view)

a. From the Start menu, select Printers and Faxes.

b. Right-click the driver icon and select Properties.

v. Click the Device Settings tab.

Windows XP, Windows Server 2003, and Windows Server 2008 (using the classic view of the Start menu):

a. Click the Start button, select Settings, and then click Printers.

b. Right-click the driver icon and select Properties.

v. Click the Device Settings tab. Windows Vista

a. Click the Start button, point to Control Panel, and in the Hardware and Sound category, click the Printer icon.

b. Right-click the driver icon and select Properties.

v. Click the Device Settings tab. Mac OS X 10.4

a. From the Apple L menu, click the System Preferences menu, and then click the Print & Fax icon.

b. Click the Printer Setup button. Mac OS X 10.5 and 10.6

a. From the Apple? Menu, click the System Preferences menu, and then click the Print & Fax icon.

b. Select your device on the left side of the page.

v. Click the Options button.

d. Click the Driver tab.

2. Move the Print Density slider to change the setting.

Configuring and Managing Printer Drivers

The product uses a preset for a specific paper type to set many internal parameters that affect print quality. Always use the settings for the appropriate media type in the printer driver. Also, check that the other settings on the Paper / Quality tab in the printer driver are correct.

Any office computer cannot be imagined without a printer. At home, its place is often taken by an MFP (multifunctional device). This replacement is absolutely justified from a practical point of view. These devices can scan, copy and print documents. Some especially advanced models can do the same with photographs. But they start at $ 300. The HP LaserJet M1132 MFP looks very interesting against the background of competitors.

Positioning

The device is positioned by the company as an inexpensive solution for home and office. Although in the case of the office, HP clearly gave a blunder. The printer, of course, is good, but in the conditions of office bedlam, it simply will not have enough speed. Even though it is laser. The LaserJet M1132 MFP is more suitable for home use. Here he will definitely have no competitors. Since this device is monochrome, it will not work for printing photographs. But for documents - this is what you need.

Appearance

With all its appearance, the printer seems to hint that it is intended only for printing documents. There is not even a hint of elegance in the appearance of the device. Right angles, stylish design. Everything is in the best traditions of office technology. However, for such devices, appearance is far from the main thing. For all the design flaws, the LaserJet M1132 MFP works just fine. And for users, the main thing is print speed and print quality. The rest is not that important.

A scanner is hidden under the top cover of the MFP, which behaves well when transferring documents to a computer. However, he will not handle photographs as well. Affected by the lack of resolution and low speed. Below are the trays for the cartridges and the sheet tray itself. The arrangement of all elements is quite convenient. There are no surprises in the design of the HP LaserJet M1132 MFP. Classics do not need excesses.

Specifications

The LaserJet M1132 MFP printer has the following specifications. Print speed - 18 pages per minute, cartridge yield - 1600 pages. The maximum monthly load is 8000 pages, the supported paper type is almost all known. It turns out that the characteristics of the MFP are pretty average. And the cartridge will run out very quickly at the maximum monthly load. It will have to be changed (or refilled) several times a month. This is about the basic characteristics of the printer.

The scanner works separately and has its own characteristics. Scanner resolution - 1200 DPI, scanning speed - 6 pages per minute, bit depth - 24 bit, scan type - flatbed. The most common scanner for transferring text documents to a computer. Recognizes text well, but it is not suitable for photographs.

Interfaces and other features

Everything here is done in the spirit of minimalism. The LaserJet M1132 MFP has only two connectors. One for the power cable, and through the second you can connect it to your computer. A truly impressive brevity. And although there are icons with the image of a network connection nearby, no connectors are observed anymore. These options are probably only available on the LaserJet Pro M1132 MFP.

The device is also equipped with 64 megabytes of permanent memory. There is no way to expand it. The control panel of the MFP has only a few buttons that help control the basic functions: copying and printing. You can also adjust the contrast and scale. This is already good. Many budget models lack even such options. The more interesting is this particular device.

Scanning process

Let's move on to this feature of the LaserJet M1132 MFP. Scanning is interesting because it can save a lot of time for a person, since there is no need to retype the "paper" text. The scanning parameters in this MFP are not flexible in their settings. Standard definition (640 by 800), standard bit (24 bit), and not very high speed. All this indicates that we have a really budget device. Just with some improvements.

The device does an excellent job of scanning documents. The scanner recognizes the text adequately. There are no problems with this. However, you will have to buy another machine to scan images. Affects the budget of the filling. But the main task of this device is printing. And the printer copes with this perfectly.

Errors during work

Any technique is imperfect. Sometimes the task cannot be completed due to the occurrence of certain errors. In the case of this device, errors on the HP LaserJet M1132 MFP printer are mostly caused by misuse or improper refilling of cartridges. Very often, users simply forget to replace the cartridge, and the printer gives an error that printing is impossible.

Also, errors can occur due to incorrectly installed drivers or other software. Errors also occur due to a paper jam in the printer mechanism. To eliminate the error, clean the mechanism. This is a long and tedious business, but it must be done, because otherwise the printer will simply not work.

Replacing and refilling cartridges

Not everything is so simple here. The cost of a printout changes when you replace or refill cartridges. The price is not very high on the LaserJet M1132 MFP. The cartridge is simply worth its weight in gold. It is HP's policy to sell printers for next to nothing, and consumables for them at exorbitant prices. If you just change the cartridge for a new one every time, then the cost of the print will rise sharply. But you can refuel them. It will be much cheaper. In this case, it will be much cheaper to print on it.

However, manufacturers recommend using only original cartridges (this is understandable). But there are reasons for using pre-filled cartridges. Since the printer is laser, refueling is dangerous. In inkjet printers, you can just pour ink - and forget. It won't work here. Therefore, it is better to buy a ready-made cartridge.

Some features of operation

No foreign odors are observed with the HP LaserJet M1132 MFP. Of the inconveniences, only a rather loud noise can be noted (compared to other models of the budget segment). There is one more feature: the device gets very hot. With continuous printing of at least 50 sheets, picking up the printed material in your hands and not getting burned is almost impossible. Therefore, it is not recommended to print large documents in one sitting. It is best to wait for the printer to cool down.

It is also not recommended to try to turn off the printer when it is just overclocked. This could damage the filling. The printing element itself can be severely damaged. In the most extreme cases, the LaserJet M1132 MFP will simply burn out. It is also worth paying attention to the stand of the print receiving tray. She's very flimsy. It is very easy to break it with a careless movement. So you need to handle it carefully.

User manual

In principle, the rules for operating printers are known to most of their owners. But you cannot rely on knowledge alone. Each model has its own unique features. And the LaserJet M1132 MFP, the instructions for which are written in Russian, are no exception. All security measures must be strictly observed. Otherwise, the MFP can easily fail.

What is worth knowing when using this printer? First, never try to print cold. The laser and the entire printer system take time to warm up. If you try to force it to print immediately after turning it on, then you will not get a sane document. This is at its best. At worst, the printer's hardware will fail. Secondly, you need to monitor the number of prints in the tray. If it exceeds the limit of 100 sheets, then the next prints will simply "jam" in the mechanism. And removing them from there is not an easy task.

Advantages and disadvantages

You can't go anywhere without this part of the review. The advantages of this model include acceptable print speed, short warm-up time, excellent print resolution, quality assembly and classic design. It can also be noted that the plastic of the case is not glossy, but matte. This means that it will not collect fingerprints. This is also a plus.

Now let's move on to the weak points of the LaserJet M1132 MFP. The cartridge is the weakest link. Its resource is catastrophically small. You will have to change it often, but it costs a lot. But this is the situation with all budget laser printers. Also, some may be frustrated by the ability to connect exclusively via the USB port. No wireless interfaces, Thunderbolt ports, or other goodies. But you shouldn't expect such options from a budget model.